The high temperature resistant star discharger is not only resistant to high temperature, but also can be used for the transportation characteristics of temperature absorbing materials and metallic powders.
High temperature star discharger products
The temperature-resistant star discharger produced by our company is different according to the temperature rise of the material conveying and the discharge opening. Because the temperature and quality have an impact on the body expansion and are not good for the bearing and oil seal system, our factory designed a high-temperature-resistant exterior structure Star-shaped unloader, which separates the running part from the part of the box that is in contact with the material. It can properly operate the bearing and the oil seal system without being affected by the temperature. Such products are not only resistant to high temperatures, but also The conveying and receiving of warm materials and metallic powders have a very good effect because such objects have penetrability. The materials that penetrate the oil seal device go directly into the bearing, which causes the machine to run unaffected and damage the machine. No contact with materials.
The high temperature resistant star discharger is not only resistant to high temperature, but also can be used for the transportation characteristics of temperature absorbing materials and metallic powders. This type of object is penetrating. The material of the oil seal device penetrates directly into the bearing, causing damage to the machine due to unreliable operation. It has the characteristics of an exterior. It is connected with a sprocket to prevent it from contacting the material.
Performance of high temperature unloader:
(1) Reliable and stable operation, low noise, few failures, long life, nodular cast iron and bearing steel, etc. Good performance and high wear resistance
(2) The star-shaped unloader has strong overload capacity and small impact inertia moment, which is suitable for frequent starting and reverse rotation.
(3) By adopting the principle of planetary rotation, the input and output are on the same axis, and it is directly integrated with the motor. Therefore, it has a compact structure, beautiful appearance, small size and light weight.
(4) Bearings, gearboxes, away from the valve body, to avoid the influence of high temperature dust, the front and rear end covers have good sealing performance, prevent dust from leaking, and prolong the service life of motor parts and lubrication systems.
The high temperature unloader device type relies on the rotation of the rotary impeller in the casing to complete the unloading action.
The high temperature resistant unloader has an upper feeding port and a lower unloading port. Under normal circumstances, when the material enters the rotary impeller from above, the volume grid such as the rotary impeller is filled, and it is returned to the discharge port to be discharged. However, in the case of negative pressure, the material is often blown back to the upper warehouse, and it is difficult to discharge the material through the impeller. Therefore, a pressure equalizing pipe is installed on the side of the casing to balance the air pressure of the impeller grid cavity with the air pressure of the upper bin, so as to facilitate the unloading of materials and improve the unloading effect.