The mine crusher dust collector is used to process the perforation, rock drilling, blasting, shipping, crushing and other processes of mine crushing open-pit mining or underground mining, and dust is emitted, which seriously pollutes the working environment and the atmospheric environment.
The mine crusher dust collector is used to process the perforation, rock drilling, blasting, shipping, crushing and other processes of mine crushing open-pit mining or underground mining, and dust is emitted, which seriously pollutes the working environment and the atmospheric environment. For dry rock drilling operations without dust protection measures, the dust concentration per meter of working flour. It can reach hundreds or thousands of milligrams. When there is no dustproof measure in the underground crushing chamber, the dust concentration is one meter. Thousands of milligrams.
The mine crusher dust collector is used to control the air pollution generated when the crusher works. When the crusher is working, some dust is flying. Because the dust particles are coarse, the dust exhaust air volume is small, the selection of dust removal is sufficient, the cyclone dust collector is simple, convenient to operate and maintain, and the price is low. As a result, the emission concentration is high, and environmental protection cannot meet the standards. We combined the characteristics of the crusher dust to develop a new cyclone + bag dust collector combination capable of capturing fine dust, which can meet environmental protection requirements. Its investment is low, and sometimes it is necessary to change the filter bag. Due to the discontinuity in the crushing operation, dust has a small impact on the filter bag and the filter bag has a long service life. It is ideal to use a special dust collector for mine crushing.
The working principle of the mine dust collector is that under the action of the fan, the dust-containing gas enters the volute cyclone through the air pipe, and the dust runs along the inner wall of the shell under the action of centrifugal force. The coarse dust is separated into the ash hopper, and the fine dust As the gas passes through the filter bag into clean gas, it is discharged into the atmosphere by the fan, and the fine powder is blocked by the filter bag on the outer surface to form a dust cake and fall to achieve the purpose of dust removal and purification.